Corded Electric Lawn Edger and Trencher (980) In Stock Now

Two adjustments on this tool.

1- the black handle near the front of the edger. Loosen this to adjust the lead wheel up/down to control the depth of the edging cut. Note the three increments on the tool and the three, matching, tabs to set the depth before you tighten this cam.

2- Above the blade area is a control which either extends or retracts an edge-following guide on the underside of the tool. With the guide down, it should be easier to follow a hard edge like a sidewalk.

Observe the diagram on this control, pull it away from the center of the tool, and then either up or down, then lock it by moving it toward the center of the tool.

-- Please be gentle with both of these adjusters. Do NOT manipulate them with your feet. This is likely to break the mechanism.