Model 1617, 2HP
¼" collet, fixed base (no plunge)
Includes:
- 16mm wrench for the arbor (narrow to fit space)
- 24mm wrench for the collet
Insert bit, then pull out slightly, maybe 1/8 inch, then tighten the collet. Do NOT tighten collet hard.
Model 1617, 2HP
¼" collet, fixed base (no plunge)
Includes:
Insert bit, then pull out slightly, maybe 1/8 inch, then tighten the collet. Do NOT tighten collet hard.